Concord

Linux on phones and tablets is a thing. Typing from my Xiaomi Pad 5 Pro running postmarketOS and LibreWolf.

How is the external display connected? I have never seen Freesync over HDMI work. The early implementations were AMD proprietary and the new ones require HDMI 2.1 which has some ridiculous bullshit about not being implemented by open source drivers. HDMI sucks, use DisplayPort if possible. If your laptop doesn’t have a DisplayPort connector, try a USB-C to DisplayPort cable, as usually the type C ports on laptops support DisplayPort alt mode.

Pretty much all ext4 except for a few Windows installs on NTFS.

Maybe this explains why my webcam indicator is on when no applications are using it. It’s been confusing me for a while now. I’ve double checked anything that I expect to access it is not, and it doesn’t seem to be locked because opening it works, but it sometimes boots up woth the light on. I am using Arch with pipewire so I’ll check and see if this is what’s going on.

I second this, second disk is best as you can keep your old Windows drive in case you ever need to go back for any reason. Modern UEFI makes dual booting way easier than it used to be as the UEFI itself provides a boot menu so you don’t need to fiddle with dual booting using a bootloader like GRUB.

I’m not sure about FF specifically, but 99% of the time you’re connecting a microcontroller to a PC you’re doing so over a serial port (UART) of some sort. It may be a physical COM port or it may be a USB to serial adapter or even a purely virtual serial port over a USB connection, but the methodology is all the same. Unless you are running a serial terminal on that port (as in, a commandline on your PC served on the given /dev/ttyX interface, not a terminal emulator letting you read/write from the port), the microcontroller can’t just run scripts on the PC. Instead, you will want to write a script/program that opens the port and waits for a command to be sent from the microcontroller, then that listener script can execute whatever functionality you require. Note that only one application can have the port active at a time, so if your listener is a separate program from your event handler, you will have to close the port on the listener before running the handler, then reopen the port on the listener once the handler is done so it can start listening for the next event. Better to just make it all one program that is always running on the PC and does both listening for events and handling them so there’s only one program that needs access to the serial port.

I don’t disagree, but today the blame lies with CrowdStrike, not Windows. As much as I hate defending Windows.

Yes, coincidence.

I can’t disagree with you there.

Should have not trusted a third party to install proprietary code into the kernel. It’s not a Windows issue directly, they have a Linux version too, but anything that allows third parties to put proprietary code into your kernel and automatically update it without your approval is untrustworthy.

It’s also a “don’t allow third party proprietary shit into your kernel” issue. If the driver was open source it would actually go through a public code review and the issue would be more likely to get caught. Even if it did slip through people would publically have a fix by now with all the eyes on the code. It also wouldn’t get pushed to everyone simultaneously under the control of a single company, it would get tested and packaged by distributions before making it to end users.

NVK is already usable, performancr isn’t 100% of the proprietary driver but I play Overwatch on NVK at 165FPS on my RTX3070 laptop a lot, low settings but very playable. This is with an Optimus configuration (VRR Freesync panel on AMD iGPU) in GNOME Wayland.

Even if so, it would likely still have proprietary blobs, just embedded into a ROM or flash chip on the card. Personally, I’d rather have firmware loaded at runtime over hard-coded, at least then the blob is able to be reverse engineered possibly.

Yeah, that ship has sailed.

I’m not familiar with KDE’s new feature yet, but if it only supports sysfs LEDs then it won’t control 99% of keyboards. Few RGB keyboards have drivers that expose this interface. Most RGB keyboards are controlled from userspace on their official software on Windows, and that’s also what most Linux projects that control RGB devices including my OpenRGB project do. I wonder if it would be possible to write an OpenRGB plugin/script that exposes a virtual /sys/class/leds/openrgb device that KDE could talk to, then translate that into OpenRGB calls to set the color on all available devices. It doesn’t sound too difficult.

I can understand a box with DisplayPort, USB, and power inputs as very few desktop PCs actually have a video- and power delivery-capable USB C port. I cannot understand the lack of controller features and HDR.

Native in this case means processor architecture, not OS. The Linux Steam is still x86/x86_64 code and to run it on an ARM system (even running Linux) will require an emulation layer. This adds substantial amounts of overhead, much more than Wine/Proton does for Windows games on Linux.

I would love to see gas stations putting in EV chargers, especially gas stations known for their food and snacks or travel stops that have restaurants because of the additional time taken to charge an EV vs. fill a gas car. Also it would be nice to see established companies run EV chargers that just let you pay with card at the “pump” like you do for gas rather than this app and account bullshit that all the mainstream networks have.

Hopefully this knocks down Tesla’s dominance in the charger ecosystem honestly, we need competition to take over that aren’t tied to a single vehicle manufacturer. Yes Tesla was going to open their network up to third party cars but they’re taking their sweet time in doing so. I hope competitors were able to swoop in and hire talent and take over broken contracts on abandoned charging station projects.