I am currently running most of my stuff from an unraid box using spare parts I have. It seems like I am hitting my limit on it and just want to turn it into a NAS. Micro PCs/USFF are what I am planning on moving stuff to (probably a cluster of 2 for now but might expand later.). Just a few quick questions:

  1. Running arr services on a proxmox cluster to download to a device on the same network. I don’t think there would be any problems but wanted to see what changes need to be done.

  2. Which micro PCs are you running? I am leaving towards HP prodesk or Lenovo 7xx/9xx series around 200 each. I don’t really plan on getting more than 2-3 and don’t run too many things, but would want enough overhead if I switch stuff over to home assistant and windows and Linux VMs if needed.

  3. Any best practices you recommend when starting a Proxmox cluster? I’ve learned over time it’s best to set it up correctly than try to fix stuff when it’s running. I wish I could coach myself from 7 years ago now. Would of saved a lot of headaches lol.

  • TCB13@lemmy.worldEnglish
    1814·
    1 year ago

    It’s 2024, avoid Proxmox and safe yourself a LOT of headaches down the line.

    You most likely don’t need Proxmox and its pseudo-open-source bullshit. My suggestion is to simply with with Debian 12 + LXD/LXC, it runs VMs and containers very well. Proxmox ships with an old kernel that is so mangled and twisted that they shouldn’t even be calling it a Linux kernel. Also their management daemons and other internal shenanigans will delay your boot and crash your systems under certain circumstances.

    What I would suggest you to use use instead is LXD/Incus.

    LXD/Incus provides a management and automation layer that really makes things work smoothly - essentially what Proxmox does but properly done. With Incus you can create clusters, download, manage and create OS images, run backups and restores, bootstrap things with cloud-init, move containers and VMs between servers (even live sometimes).

    Another big advantage is the fact that it provides a unified experience to deal with both containers and VMs, no need to learn two different tools / APIs as the same commands and options will be used to manage both. Even profiles defining storage, network resources and other policies can be shared and applied across both containers and VMs.

    I draw your attention to containers (not docker), LXC containers because for most people full virtualization isn’t even required. In a small homelab if you can have containers that behave like full operating systems (minus the kernel) including persistence, VMs might not be required. Either way LXD/Incus will allow for both and you can easily mix and match and use what you require for each use case.

    For eg. I virtualize the official HomeAssistant image with LXD because we all know how hard is to get that thing running, however my NAS / Samba shares are just a LXD Debian 12 container with Samba4, Nginx and FileBrowser. Sames goes for torrent client that has its own container. Some other service I’ve exposed to the internet also runs a full VM for isolation.

    Like Proxmox, LXD/Incus isn’t about replacing existing virtualization techniques such as QEMU, KVM and libvirt, it is about augmenting them so they become easier to manage at scale and overall more efficient. I can guarantee you that most people running Proxmox today it today will eventually move to Incus and never look back. It woks way better, true open-source, no bugs, no BS licenses and way less overhead.

    Yes, there’s a WebUI for LXD as well!

    • node815@lemmy.worldEnglish
      9·
      1 year ago

      Since you didn’t include a link to the source for your recommendation:

      https://github.com/canonical/lxd

      I’ve been on Proxmox for 6 or so months with very few issues and have found it to work well in my instance, I do appreciate seeing another alternative and learning about it too! I very specifically like Proxmox as it gives me an actual IP on my router’s subnet for my machines such as Home Assistant. So instead of the 192.168.122.1 it rolls a nice 192.168.1.X/24 IP which fits my range which makes it easier for me to direct my outside traffic to it. Does this also do this? Based on your screenshots, maybe not, IDK.

      • jgkawell@lemmy.worldEnglish
        7·
        1 year ago

        Thanks for the link! I’ve been running Proxmox for years now without any of the issues like the previous commenter mentioned. Not that they don’t exist, just that I haven’t hit them. I really like Proxmox but love hearing about alternatives. One day I might get bored and want to set things up new with a different stack and anything that’s more free/open is better in my book.

      • TCB13@lemmy.worldEnglish
        1·
        1 year ago

        it gives me an actual IP on my router’s subnet for my machines

        Yes you configure LXD/Incus’ networking to use a bridge and it will simply delegate the task to your router instead of proving IPs itself. One of my nodes actually runs the two setups at the same time, I’ve a bunch of containers on an internal range and then my Home Assistant VM getting an IP from my router.

    • Possibly linux@lemmy.zipEnglish
      62·
      1 year ago

      Your comment is wrong in a few ways and suggests using a LXC which is way slower than docker or podman and lacks the easy setup.

      Proxmox is good because it makes it easy to create VMs and setup least access. It also has as new of kernel as stable Debian so no, its not terribly out of date.

      If you want to suggest that someone install Debian + Docker compose that would make more sense. This isn’t a good setup for more advanced setups and it doesn’t allow for a not of flexibility.

      • TCB13@lemmy.worldEnglish
        47·
        1 year ago

        This was a discussion about management solutions such as Proxmox and LXD and NOT about containerization technologies like Docker or LXC. Also Proxmox uses the Proxmox VE Kernel that is derived from Ubuntu.

        Your comment makes no sense whatsoever. I’m not even sure you know the difference between LXD and LXC…

    • drkt@feddit.dkEnglish
      3·
      1 year ago

      I’m going to experiment with this! I would love to get rid of Proxmox, it has so many problems and I only run containers anyway.

      Is there an easy way to migrate containers? I’m not well versed in LXC despite using it for years.

      • TCB13@lemmy.worldEnglish
        21·
        1 year ago

        I’ve no ideia if there’s a reasonable migration path but after running Proxmox for years I wouldn’t even want stuff that was tainted by it ever running on my pristine LXD nodes.

        • drkt@feddit.dkEnglish
          2·
          1 year ago

          It’d be a pain in the rear to rebuild everything. This proxmox machine is the center of everything, even housing the disk all the config backups are on. I should probably not be doing that…

          • TCB13@lemmy.worldEnglish
            3·
            1 year ago

            If you’re on a recent proxmox setup that uses LXC containers you might be able to export those containers using lxc-snapshot or some other method and move them to the LXD node… May work just fine, may require other adjustments.

            Personally the move was worth it. I’m not gonna lie, a ton of my most complex solutions are setup using cloud-init and Ansible so moving from one solution to another was mostly running those again and watch the machines get re-created.

            • drkt@feddit.dkEnglish
              1·
              1 year ago

              I’ll look at lxc snapshots after the hardware upgrade I got lined up, thanks!